Have you had difficulty using a USB to RS-232 adapter to connect your RS-232 device to a computer? If so, you are not alone.

1. Usb Driver Download For Mac

Our customers frequently encounter issues with these adapters. In this article, I’ll briefly discuss the origin of these issues and provide you with some suggestions for successfully handling them. The Evolution from RS-232 to USB In the old days of personal computers, one of the primary connections available was the RS-232 serial port. Apart from the parallel port, it was the primary means to connect an external device. The connector was reduced from a 25-pin connector to a 9-pin connector, but RS-232 ports remained present on every computer for many years. Built-in RS-232 ports featured direct mapping to memory and worked at a high priority.

Data practically flowed directly to and from the software that was accessing the serial port. In 1996, the Universal Serial Bus (USB) standard was introduced as a replacement for the serial connector and other connector types that were typically found on the back of computers.

The USB provided smaller connectors and more data throughput than the serial and parallel interfaces it replaced. USB devices have high throughput, but they use a shared data bus. Data is wrapped up and transferred in packets.

To handle the packets and move data in and out of the program accessing the USB device, a software driver is needed. The software driver sits between the hardware and the computer program you are using, and it must be installed and working correctly. The Necessity of an Adapter With the widespread adoption of USB, most computers sold now do not have an RS-232 port. Therefore, to connect an RS-232 device (such as a ) to a computer, you need to use a USB to RS-232 adapter, such as the. While USB to RS-232 adapters perform a necessary function, they do have some limitations. For example, there are three types of problems that you may encounter when using a USB to RS-232 adapter:. Driver issues.

Hardware issues. Performance issues Issue #1: Driver The most common problem that our customers encounter with a USB to RS-232 adapter is getting the proper driver installed. The driver must correspond to the chip inside the cable—not to the manufacturer of the cable.

For USB to RS-232 chips, there are two primary manufacturers: Prolific and FTDI. Because off-brand chips with poor drivers are unreliable, Campbell Scientific recommends and currently sells a cable using an FTDI chip.

We chose this cable because it uses a chip that has a certified driver available on Windows Update. (The older cables were silver in color and did not have a driver available for Windows beyond version 7.) Tip: Test your USB adapters in the office with your field computer.

When you are in the field, your computer won’t have an Internet connection to automatically download and install the driver. If the driver for your adapter is not automatically installed or cannot be installed from a CD, you will need to identify the chip in your cable and locate the driver on the Internet. Some manufacturers identify on their packaging which chip is used inside their cable. You can also identify a cable’s chip from the Windows Device Manager by following these steps:. In the Windows Device Manager, right-click your device from the list. In the drop-down menu that opens, select Properties. In the Properties dialog box, select the Details tab.

In the Property field, select Hardware Ids from the drop-down menu. In the Value field, there is both a VID (Vendor ID) and a PID (Product ID). These IDs respectively indicate the manufacturer and the model number of the chip. In the example above, I did a quick Internet search for VID 0403 PID 6011, which revealed to me that the chip is an FT4232 manufactured by FTDI.

After you know your chip type and manufacturer, you can locate and download the correct driver for your version of Windows. Issue #2: Hardware USB to RS-232 adapters are commodity pieces of computer equipment. As much as we all wish that everything was as reliable as the CR1000, all adapter cables eventually fail. Although there are two primary companies that manufacture USB to RS-232 adapter chips, there are many cable manufacturers who offer varying levels of cable quality. Higher-quality, industrial models should last longer, but they wear out over time—just like any field tool.

A poorly constructed cable could have components that fail in a short period of time—perhaps even by the time you receive the cable. I have seen several cases where old cables could no longer handle 115200 baud, but the cables still worked on low baud rates. There have been many more cases where a USB cable stopped working half-way through a day in the field. Tip: If your field site is far from your office, take two USB to RS-232 cables with you. Lost time in the field can be a lot more costly than the purchase price of a second cable. Iorgsoft dvd maker for mac. Issue #3: Performance As mentioned previously, USB uses a shared data bus with packetized communication. The packetized communication introduced some latency (data transfer time) that wasn’t present with built-in RS-232 ports.

Unfortunately, latency makes a noticeable difference when you download large amounts of data or upload a new operating system. The driver for FTDI chips allows you to lower the latency time on packets. To do this, you can use the Latency Timer field, which is accessed through the Windows Device Manager.

Follow these steps:. From the Windows Device Manager, right-click your device from the list.

In the drop-down menu that opens, select Properties. Click the Port Settings tab. Click the Advanced button. In the Advanced Settings window, navigate to the Latency Timer field, and reduce the setting to 1 for best performance.

In addition to lowering your latency time, I also recommend disabling the Selective Suspend option for your cable. The Selective Suspend option allows Windows to put your hardware to sleep, which can result in corrupt data packets. To disable the Selective Suspend option, clear the checkbox for the Enable Selective Suspend field on the Advanced Settings window for your device. Note: The Selective Suspend option is already disabled by default in the FTDI driver.

Conclusion Newer data logger designs, such as the, feature a native USB connection. Many devices, however, will feature RS-232 connections for years to come, and we’ll need to continue using USB to RS-232 adapter cables. I hope the suggestions I’ve provided help.

Feel free to share any USB to RS-232 issues that you have encountered by posting a comment below.

USB to RS232 Professional, this is the Best and most reliable USB to RS232 adapter anywhere backed by a Five Year Warranty from a USB Company that has been selling USB product for over a decade. Ships with Microsoft Certified Drivers and optimized for New 32 and 64-Bit Windows Vista and Windows 10, 8, 7 but will of course also work perfectly fine with Windows 98, 2000 and XP. It is suitable for most applications, including industrial, commercial and any general office computer device Supports Windows 7 and Vista (32 and 64-Bit) FT232RL RoHS Compliant PRO USB Serial Adapter with Com Port Retention Technology and High-Speed 920K Support. Professional Grade Solution for Legacy or Industrial serial RS-232 device connectivity to a Laptop or Desktop Computer. This Adapter Retains all COM port setting assigned by the operating system and or modified by user.

Usb Driver Download For Mac

This is very convenient if adapter is disconnected and reconnected at a later time to another USB port on the same computer. Install as a standard Windows COM port, Full RS-232 modem control signals, RS-232 data signals; TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND This USB to Serial converter allows you to connect a RS-232 serial device such as a modem to a USB port on your Desktop or Laptop PC. Connect MOST Serial Devices to a USB Port Microsoft Certified and Signed Drivers High Speed Serial Best in Class Compatibility Data and Status LED Plug&Play Bus Powered The Ultimate USB Serial Adapter PC/MAC/Linux Fully RoHS compliant and is CE and FCC approved. Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the same way as it would access a standard COM port. Drivers are available for:. Windows 10.

Windows 8. Windows 7. Windows Vista 64-Bit Windows XP 64-Bit. Windows Server 2003 x64. May 2006 Microsoft WHQL Certified for Windows XP x64 and Windows Server 2003 x64.

Windows Vista. Windows Server 2003. Windows XP x64 Windows. Server 2003 x64. Windows XP. Windows 2000.

Windows ME. Windows 98. Linux. Mac OS X.

Mac OS 9. Mac OS 8 Drivers and Utilities CD complete with Microsoft WHQL certified VCP drivers for Windows XP.